This article shows the configuration of a file server with these characteristics:
- service: SMB,
- filesystem: ZFS,
- operating system: FreeBSD 10.0-RELEASE,
- hardware: virtualized with Hyper-V (Windows 8 Pro).
The purpose is to archive the most important data on a filesystem that can minimize the risk of data corruption, as discussed in this article: arstechnica.com/information-technology/2014/01/bitrot-and-atomic-cows-inside-next-gen-filesystems.
This is a home setup, for me all this infrastructure has the only purpose to prevent data corruption, data will be duplicated and checksummed by the ZFS filesystem, but on just one physical drive. For helping against data loss caused by hardware failure, I will do a backup copy of the virtual drive with the data on external physical hard drives.
Creating the virtual machine
I created the virtual machine using the Hyper-V management console:
- RAM: 1GB,
- network: connected to a virtual switch,
- virtual hard drive: 32GB - dynamic expansion,
- management options: always start at boot time.
Installing and configuring the operating system
I installed FreeBSD on the virtual machine.
I created a non-root user and I added it to the wheel group, so it is possible for me to connect to the system by ssh and to manage it by becoming root using the "su" command.
I modified the network interface card configuration as it is explained there: coreboarder.com/blog/?p=15.
After installing FreeBSD on a Hyper-V machine I had no network connection.
The solution is to modify rc.conf that DHCP will always work on boot
Comment the following with a “#”:
Add the following:
ifconfig_YOURNICID=”SYNCDHCP media 100baseTX mediaopt full-duplex”
I restarted the operating system and when it was up again, I connected to it and I tested the network connectivity.
The settings suggested in the above document gave me this warning:
ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
Consider tuning vm.kmem_size and vm.kmem_size_max in /boot/loader.conf.
So I configured these settings:
root@fbsd1:~ # ed /boot/loader.conf a vm.kmem_size="512M" vm.kmem_size_max="512M" vfs.zfs.arc_max="40M" vfs.zfs.vdev.cache.size="5M" . w q root@fbsd1:~ #
I powered off the system with the "poweroff" commmand of the operating system.
Adding a virtual hard disk for the data
From the Hyper-V management console I added a virtual hard disk, which will contain the ZFS filesystem where the data will be stored. I added it on the IDE controller 1, I created it as a VHDX with dynamic expasion, of 300GB.
I powered on the virtual machine and I used the command "dmesg" to understand the name of the newly added device (the virtual hard disk):
dmesg ... da1 at blkvsc1 bus 0 scbus2 target 1 lun 0 da1:
Fixed Direct Access SCSI-4 device da1: 300.000MB/s transfers da1: Command Queueing enabled da1: 307200MB (629145600 512 byte sectors: 255H 63S/T 39162C) ...
Preparing the aread for the data
I created the ZFS pool and filesystem, see also 18.104.22.168. Single Disk Pool - The Z File System (ZFS) - FreeBSD Handbook.
root@fbsd1:~ # cd / root@fbsd1:/ # zpool create m1pool /dev/da1 root@fbsd1:/ # zfs create m1pool/m1fs root@fbsd1:/ # zfs set copies=3 m1pool/m1fs root@fbsd1:/ # df -g Filesystem 1G-blocks Used Avail Capacity Mounted on /dev/da0p2 36 2 31 7% / devfs 0 0 0 100% /dev m1pool 293 0 293 0% /m1pool m1pool/m1fs 293 0 293 0% /m1pool/m1fs root@fbsd1:/ #
Starting from now I can verify the data manually:
root@fbsd1:/ # zpool status m1pool pool: m1pool state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM m1pool ONLINE 0 0 0 da1 ONLINE 0 0 0 errors: No known data errors root@fbsd1:/ # zpool scrub m1pool root@fbsd1:/ # echo $? 0 root@fbsd1:/ #
I created an user just for being used with the SMB service, I created it with its home directory inside the ZFS filesystem.
root@fbsd1:/m1pool/m1fs # adduser -d /m1pool/m1fs -s nologin -u 1000 -w random Username: m1user Full name: Marco SMB Access Uid : Login group [m1user]: Login group is m1user. Invite m1user into other groups? : Login class [default]: Shell (sh csh tcsh nologin) [nologin]: Home directory [/m1pool/m1fs/m1user]: Home directory permissions (Leave empty for default): Use password-based authentication? [yes]: Use an empty password? (yes/no) [no]: Use a random password? (yes/no) [yes]: Lock out the account after creation? [no]: Username : m1user Password :
Full Name : Marco SMB Access Uid : 1000 Class : Groups : m1user Home : /m1pool/m1fs/m1user Home Mode : Shell : /usr/sbin/nologin Locked : no OK? (yes/no): yes adduser: INFO: Successfully added (m1user) to the user database. adduser: INFO: Password for (m1user) is: RANDOMPASSWORDISHERE Add another user? (yes/no): no Goodbye! root@fbsd1:/m1pool/m1fs #
Coonfiguring the SMB service (SAMBA)
root@fbsd1:/ # pkg The package management tool is not yet installed on your system. Do you want to fetch and install it now? [y/N]: y Bootstrapping pkg from pkg+http://pkg.FreeBSD.org/freebsd:10:x86:64/latest, please wait... Verifying signature with trusted certificate pkg.freebsd.org.2013102301... done Installing pkg-1.3.6: 100% Message for pkg-1.3.6: If you are upgrading from the old package format, first run: # pkg2ng pkg: not enough arguments Usage: pkg [-v] [-d] [-l] [-N] [-j
|-c ] [-C ] [-R ] [-o var=value] [ ] For more information on available commands and options see 'pkg help'. root@fbsd1:/ # pkg install net/samba36 Updating repository catalogue Fetching meta.txz: 100% of 940 B Fetching digests.txz: 100% of 2 MB Fetching packagesite.txz: 100% of 5 MB Adding new entries: 100% Incremental update completed, 23314 packages processed: 0 packages updated, 0 removed and 23314 added. Updating database digests format: 100% The following 13 packages will be affected (of 0 checked): New packages to be INSTALLED: samba36: 3.6.24_2 libsunacl: 1.0 cups-client: 1.7.3_2 openldap-client: 2.4.39_1 tevent: 0.9.21 python27: 2.7.8_2 gettext: 0.18.3.1_1 indexinfo: 0.2 python2: 2_3 talloc: 2.1.0 tdb: 1.2.13,1 pkgconf: 0.9.6_1 popt: 1.16 The process will require 194 MB more space 34 MB to be downloaded Proceed with this action [y/N]: y Fetching samba36-3.6.24_2.txz: 100% of 21 MB Fetching libsunacl-1.0.txz: 100% of 8 KB Fetching cups-client-1.7.3_2.txz: 100% of 760 KB Fetching openldap-client-2.4.39_1.txz: 100% of 995 KB Fetching tevent-0.9.21.txz: 100% of 43 KB Fetching python27-2.7.8_2.txz: 100% of 8 MB Fetching gettext-0.18.3.1_1.txz: 100% of 2 MB Fetching indexinfo-0.2.txz: 100% of 6 KB Fetching python2-2_3.txz: 100% of 2 KB Fetching talloc-2.1.0.txz: 100% of 48 KB Fetching tdb-1.2.13,1.txz: 100% of 77 KB Fetching pkgconf-0.9.6_1.txz: 100% of 23 KB Fetching popt-1.16.txz: 100% of 62 KB Checking integrity... done (0 conflicting) [1/13] Installing indexinfo-0.2: 100% [2/13] Installing gettext-0.18.3.1_1: 100% [3/13] Installing python27-2.7.8_2: 100% [4/13] Installing python2-2_3: 100% [5/13] Installing talloc-2.1.0: 100% [6/13] Installing pkgconf-0.9.6_1: 100% [7/13] Installing libsunacl-1.0: 100% ===> Creating users and/or groups. Creating group 'cups' with gid '193'. Creating user 'cups' with uid '193'. [8/13] Installing cups-client-1.7.3_2: 100% [9/13] Installing openldap-client-2.4.39_1: 100% [10/13] Installing tevent-0.9.21: 100% [11/13] Installing tdb-1.2.13,1: 100% [12/13] Installing popt-1.16: 100% [13/13] Installing samba36-3.6.24_2: 100% root@fbsd1:/ # cp /usr/local/share/examples/samba36/smb.conf.default /usr/local/etc/smb.conf root@fbsd1:/ # vi /usr/local/etc/smb.conf (esempio delle modifiche effettuate) root@fbsd1:/m1pool/m1fs # diff /usr/local/share/examples/samba36/smb.conf.default /usr/local/etc/smb.conf 26c26 < workgroup = MYGROUP --- > workgroup = WORKGROUP 41c41 < ; hosts allow = 192.168.1. 192.168.2. 127. --- > hosts allow = 192.168.0.4 192.168.0.11 127. 45c45 < load printers = yes --- > load printers = no root@fbsd1:/m1pool/m1fs # echo 'samba_enable="YES"' >> /etc/rc.conf root@fbsd1:/m1pool/m1fs # service samba start Removing stale Samba tdb files: done Starting nmbd. Starting smbd. root@fbsd1:/m1pool/m1fs # smbpasswd -a m1user New SMB password: Retype new SMB password: Added user m1user. root@fbsd1:/m1pool/m1fs #